Availability: 7 in stock
ACDelco Silver (Advantage) Suspension Ball Joints are a quality, high value alternative for General Motors vehicles as well as most makes and models and are backed by General Motors. These suspension ball joints connect your vehicle’s control arm to its steering knuckle, and feature a polychloroprene (neoprene) dust boot on most applications, and one-piece housing. It also includes studs and all hardware. ACDelco Silver (Advantage) parts are a good choice for many vehicles on the road today. Some ACDelco Silver parts may have formerly appeared as ACDelco Advantage. ⚠ WARNING: Cancer and Reproductive Harm –
suspension-ball-joint;ball-joint;suspension-joint;suspension-ball
Part number 46d0010a is the reference number for this listing; confirm it against your original part before ordering.
| Brand |
ACDelco |
|---|---|
| Part Number (MPN) |
46D0010A |
| SKU |
46D0010A |
| UPC / GTIN |
195491480674 / 00195491480674 |
| Condition |
New |
| Other Names |
19460563 |
| Adjustable |
No |
| Ball Joint Assembly |
Yes |
| Bushings Included |
No |
| Castle Nut Included |
Yes |
| Cotter Pin Hole |
Yes |
| Cotter Pin Included |
Yes |
| Distance Between Mounting Holes (in) |
2.54 |
| Dust Boot Included |
Yes |
| FAQ – Answer 1 |
Yes. ACDelco Advantage Chassis parts are for both GM and non-GM vehicle applications. |
| FAQ – Answer 2 |
Yes. You should replace your ball joints as a set to make front end alignment easier. |
| FAQ – Answer 3 |
Yes. Installing new ball joints can interfere with the alignment of your vehicle, so a full four-wheel vehicle alignment is recommended following ball joint replacement. |
| FAQ – Question 1 |
Can I use ACDelco Advantage Chassis parts on my non-GM vehicle? |
| FAQ – Question 2 |
Should I replace my ball joints as a set? |
| FAQ – Question 3 |
Should I perform a vehicle alignment after installing ball joints? |
| Features & Benefits – Bullet 1 |
Manufactured at ISO 9001-certified facilities |
| Features & Benefits – Bullet 2 |
Greaseable where applicable |
| Features & Benefits – Bullet 3 |
Some ACDelco Silver parts may have formerly appeared as ACDelco Advantage |
| Features & Benefits – Bullet 4 |
Economical value with dependable quality |
| Features & Benefits – Bullet 5 |
For General Motors vehicles as well as most makes and models |
| Friction Material Composition |
356 |
| Good Maintenance Practices – Section 1 – Bullet 1 |
Use new components during installation. If you replace your vehicle’s ball joints, make sure to use new mounting hardware, rather than reusing the old. |
| Good Maintenance Practices – Section 1 – Bullet 2 |
Avoid replacing only one ball joint at a time. If you choose to replace a ball joint, you should consider replacing ball joints as a set to make alignment easier. |
| Good Maintenance Practices – Section 1 – Bullet 3 |
Installing a new ball joint can interfere with the alignment of your vehicle. Perform a full four-wheel vehicle alignment after any ball joint replacement. |
| Good Maintenance Practices – Section 1 – Header |
Inspect or have your ball joints inspected for signs of wear. Over time, lubrication inside the ball joint can dry out, leading to joint wear. Even sealed ball joints can be exposed to air, and if the ball joint’s protective boot is damaged, dirt and debris could further harm the function and life of the joint. Exposure to harsh driving conditions like pot holes, bumpy road surfaces, or road salt may also cause ball joints to fail. Worn ball joints could result loss of vehicle control or tire damage. Inspect your ball joints regularly, following exposure to events that may harm the component, or when you experience signs of ball joint wear. |
| Grease Fitting Included |
Yes |
| Greaseable |
Yes |
| Height |
3.5 |
| Length |
4.2 |
| Material |
Steel |
| Mounting Bolt Length |
1.19 |
| Mounting Bolts Included |
Yes |
| Mounting Hardware Included |
Yes |
| Mounting Hole Quantity |
3 |
| PADB ID 2076 |
0.500 |
| PADB ID 9206 |
1.25 |
| PADB ID 9208 |
8 |
| PADB ID 9214 |
20 |
| Signs of Wear & Troubleshooting – Section 1 – Bullet 1 |
Tire wear: as ball joints wear, they allow the front wheels of your vehicle to point outward and away from each other in a ‘toe-out’ position. This position will result in uneven wear on one side of your tire that feathers across the tread toward its center. Worn ball joints may also be signaled by a more extreme variation of uneven tire wear, called camber wear, where the tire leans in or out at the top, and a hard line of excess wear is seen along one edge of your vehicle’s tire. |
| Signs of Wear & Troubleshooting – Section 1 – Bullet 2 |
Alignment issues: an inability to set your vehicle’s alignment to proper specifications may be a sign of ball joint wear. |
| Stud Tapered End 1 Diameter |
0.630 |
| Stud Tapered End 2 Diameter |
0.543 |
| Stud Type |
Tapered, Threaded |
| Suspension Grade Type |
Standard |
| Washers Included |
Yes |
| Width |
101.6 |
| Width (in) |
4 |
| ACDelco |
45D0010 |
| Autospecialty |
282002, 0282002E |
| BRUTE POWER |
8470339 |
| Barcap |
A1-110 |
| Centric Parts |
610.66032, 61166032 |
| Coni-Seal |
XK6034 |
| DELPHI |
TC5382 |
